Mark Hall Mark Hall's Profile Page

Mark Hall Mark Hall

0 Course Enrolled • 0 Course Completed

Biography

Zertifizierung der JN0-683 mit umfassenden Garantien zu bestehen

It-Pruefung ist eine Website, mit deren Hilfe Sie die Juniper JN0-683 Zertifizierungsprüfung schnell bestehen können. Die Fragenkataloge zur Juniper JN0-683 Zertifizierungsprüfung von It-Pruefung werden von den Experten zusammengestellt. Wenn Sie sich noch anstrengend um die Juniper JN0-683 (Data Center, Professional (JNCIP-DC)) Zertifizierungsprüfung bemühen, sollen Sie die Prüfungsunterlagen zur Juniper JN0-683 Zertifizierungsprüfung von It-Pruefung wählen, die Ihnen große Hilfe bei der Prüfungsvorbereitung leisten.

Die Schulungsunterlagen zur Juniper JN0-683 Prüfung von It-Pruefung sind eine Sammlung der Erfahrungen von denjenigen, die im IT-Bereich schon zertifiziert sind und ein Ergebnis der Innovation. Unsere Berufsgruppe von IT-Eliten bietet den breiten Kandidaten ständig die neuesten Schulungsunterlagen zur Juniper JN0-683 Zertifizierungsprüfung, deren Korrektheit zweifellos ist. Unser Ziel liegt darin, dass die Kandidaten in kürzester Zeit die Juniper JN0-683 Ziertifizierungsprüfung beim ersten Versuch bestehen können.

>> JN0-683 PDF Testsoftware <<

JN0-683 Unterlagen mit echte Prüfungsfragen der Juniper Zertifizierung

It-Pruefung ist eine Website, die den Kandidaten, die sich an den Juniper JN0-683 IT-Zertifizierungsprüfungen beteiligen, Bequemlichkeiten bietet. Viele Kandidaten, die Produkte von It-Pruefung benutzt haben, haben die IT-Zertifizierungsprüfung einmalig bestanden. Ihre Feedbacks haben gezeigt, dass die Hilfe von It-Pruefung sehr wirksam ist. Das Expertenteam von It-Pruefung setzt sich aus den erfahrungsreichen IT-Experten zusammen. Sie bearbeiten nach ihren Fachkenntnissen und Erfahrungen die Schulungsunterlagen zur Juniper JN0-683 Zertifizierungsprüfung. Die Schulungsunterlagen werden Ihnen sicher viel Hilfe leisten. Die Simulationssoftware und Fragen zur Juniper JN0-683 Zertifizierungsprüfung werden nach dem Prüfungsprogramm zielgerichtet bearbeitet. Sie werden Ihnen sicher helfen, die Juniper JN0-683 Zertifizierungsprüfung zum ersten Mal zu bestehen.

Juniper JN0-683 Prüfungsplan:

Thema
Einzelheiten

Thema 1

Data Center Interconnect: For Data Center Engineers, this part focuses on interconnecting data centers, covering Layer 2 and Layer 3 stretching, stitching fabrics together, and using EVPN-signaled VXLAN for seamless communication between data centers.

Thema 2

EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.

Thema 3

Layer 3 Fabrics: This section measures the knowledge of professionals managing IP-based networks in data centers. It covers IP fabric architecture and routing, ensuring candidates understand how the network is structured for scalability and how traffic is routed efficiently.

Juniper Data Center, Professional (JNCIP-DC) JN0-683 Prüfungsfragen mit Lösungen (Q45-Q50):

45. Frage
You are deploying a new network lo support your Al workloads on devices that support at least 400 Gbps Ethernet. There is no requirement for any Layer 2 VLANs in this network. Which network architecture would satisfy this requirement?

A. an IP fabric using EBGP
B. an IP fabric using the EVPN-MPLS architecture
C. an IP fabric with an EVPN-VXLAN architecture
D. an IP fabric using PIM-SM to signal VXLAN overlay

Antwort: A

Begründung:
* Requirements for AI Workloads:
* The scenario requires a network that supports at least 400 Gbps Ethernet and does not require Layer 2 VLANs. This setup is well-suited for a pure Layer 3 network, which can efficiently route traffic between devices without the overhead or complexity of maintaining Layer 2 domains.
* Choosing the Right Network Architecture:
* Option D:An IP fabric using EBGP (External BGP) is ideal for this scenario. In a typical IP fabric, EBGP is used to handle routing between spine and leaf switches, creating a scalable and efficient network. Since there is no need for Layer 2 VLANs, the pure IP fabric design with EBGP provides a straightforward and effective solution.
* Options A, B, and Cinvolve more complex architectures (like VXLAN or EVPN), which are unnecessary when there's no requirement for Layer 2 overlays or VLANs.
Conclusion:
* Option D:Correct-An IP fabric with EBGP is the most suitable and straightforward architecture for a network that needs to support high-speed AI workloads without Layer 2 VLANs.

46. Frage
You are deploying an IP fabric using EBGP and notice that your leaf devices are advertising and receiving all the routes. However, the routes are not installed in the routing table and are marked as hidden.
Which two statements describe how to solve the issue? (Choose two.)

A. You need to configure multipath multiple-as.
B. You need to configure loops 2.
C. You need to configure a next-hop self policy.
D. You need to configure as-override.

Antwort: A,B

47. Frage
Exhibit.

Host A is connected to vlan 100 on lead. Host B is connected to vlan 200 on leaf1. Host A and Host B ate unable to communicate. You have reviewed the touting and your hosts have the correct default route (.1) Referring to the exhibit, which two commands will solve the problem? (Choose two.)

A. set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10
B. set interfaces irb unit 100 family inet address 192-168.100.1
C. delete vlans vn200 13-interface irb.200
D. set vlans vn10013-interface irb.100

Antwort: A,D

Begründung:
In the provided network configuration, Host A is in VLAN 100 and Host B is in VLAN 200. The issue arises because these two hosts are unable to communicate, which indicates that either the interfaces are not properly linked to their respective VLANs, or there is a missing static route required for inter-VLAN routing.
Step-by-Step Analysis:
* VLAN Assignment:
* The exhibit shows that irb.200 is correctly associated with VLAN 200 in the configuration.
However, there is no corresponding irb.100 for VLAN 100. Without irb.100, the network lacks the logical interface to handle routing for VLAN 100. Thus, adding irb.100 to VLAN 100 is necessary.
Command to solve this:
set vlans vn100 13-interface irb.100
* Static Route Configuration:
* For inter-VLAN routing to occur, a static route needs to be configured that allows traffic to pass between different subnets (in this case, between VLAN 100 and VLAN 200). The command set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10 would add a static route that directs all traffic from VLAN 100 to the correct gateway (192.168.200.10), which is necessary to route traffic between the two VLANs.
Command to solve this:
set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10
Explanation of Incorrect Options:
* Option A (delete vlans vn200 13-interface irb.200): This would remove the logical interface associated with VLAN 200, which is not desired because we need VLAN 200 to remain active and properly routed.
* Option B (set interfaces irb unit 100 family inet address 192-168.100.1): This command would incorrectly assign an IP address that does not correspond with the subnet of VLAN 100 (192.168.200.1
/24). This could create a misconfiguration, leading to routing issues.
Data Center References:
For a Data Center, proper VLAN management and static routing are crucial for ensuring that different network segments can communicate effectively, especially when dealing with separated subnets or zones like in different VLANs. This aligns with best practices in DCIM (Data Center InfrastructureManagement) which stress the importance of proper network configuration to avoid downtime and ensure seamless communication between all critical IT infrastructure components.
Ensuring that the correct interfaces are associated with the correct VLANs and having the proper static routes in place are both essential steps in maintaining a robust and reliable data center network.
This detailed analysis reflects best practices as noted in standard data center design and network configuration guides.

48. Frage
You are asked for TX and RX traffic statistics for each interface to which an application server is attached.
The statistics need to be reported every five seconds. Using the Junos default settings, which telemetry method would accomplish this request?

A. Native Sensors
B. OpenConfig
C. gNMI
D. SNMP

Antwort: A

Begründung:
* Telemetry Methods in Junos:
* Telemetry is used to collect and report data from network devices. For high-frequency statistics reporting, such as every five seconds, you need a telemetry method that supports this level of granularity and real-time monitoring.
* Junos Native Sensors:
* Option C:Native Sensors in Junos provide detailed, high-frequency telemetry data, including TX and RX traffic statistics for interfaces. They are designed to offer real-time monitoring with customizable sampling intervals, making them ideal for the five-second reporting requirement.
Conclusion:
* Option C:Correct-Native Sensors in Junos are capable of providing the required high-frequency telemetry data every five seconds.

49. Frage
Exhibit.

You have a sample configuration for connecting two sites through EVPN-VXLAN by exchanging IP prefix routes.
Referring to the exhibit, which two statements regarding the configuration are true? {Choose two.)

A. The VNI must match on all devices for the same customer.
B. The VNI should be unique on all devices for each customer site.
C. The advertise direct-nexthop option enables the receiver to resolve the next-hop route using only information carried in the Type 2 route.
D. The advertise direct-nexthop option enables the receiver to resolve the next-hop route using only information carried in the Type 5 route.

Antwort: A,D

Begründung:
EVPN-VXLAN Configuration:
* The configuration provided in the exhibit shows an EVPN-VXLAN setup where IP prefix routes are exchanged between two sites. The advertise direct-nexthop option and the VNI (Virtual Network Identifier) settings are crucial in this context.
Advertise Direct-Nexthop:
* Option A:The advertise direct-nexthop option ensures that the next-hop route is resolved using only the information carried in the EVPN Type 5 route. Type 5 routes are used for IP prefix advertisement in EVPN, which is key to enabling Layer 3 interconnectivity between different VXLAN segments.
VNI Consistency:
* Option C:For the same customer across different devices, the VNI must be consistent. This consistency ensures that all devices can correctly map traffic to the appropriate VXLAN segment, maintaining seamless Layer 2 and Layer 3 connectivity.

50. Frage
......

Sie haben einen großen Traum. Sie können viele Materialien zur Vorbereitung finden. Unsere Fragenkataloge zur Juniper JN0-683 Zertifizierungsprüfung können Ihren Traum verwirklichen. Die Fragen und Antworten zur Juniper JN0-683 Zertifizierungsprüfung von It-Pruefung werden von den erfahrungsreichen IT-Fachleuten bearbeitet. Mit unseren Produkten können Sie alle Probleme versuchen. Wir würden Ihnen versprechen, dass die Kandidaten die realen Antworten 100% bekommen.

JN0-683 Probesfragen: https://www.it-pruefung.com/JN0-683.html